Hydraulic Steel Scrap Shear 630 Ton PLC Automatic For Scrap Yard And Recycling Plant 8–10 t/h Capacity

1. Product Description

1.1 Product Positioning

The Q43W-6300A hydraulic steel scrap shear is designed for scrap yards and recycling plants that need to process oversized ferrous materials efficiently. It is suitable for cutting mixed steel scrap, profile steel, and plate scrap into shorter sections that are easier to store, transport, and sort.

For operators handling medium to high scrap volumes, this machine provides a stable combination of automatic control, hydraulic cutting force, and practical output capacity.

1.2 Technical Specifications

1.3 Typical Applications

1. Scrap Yard Oversized Scrap Cutting
Scrap yards often collect long, mixed ferrous materials that cannot be loaded efficiently in their original size. The machine cuts them down to improve transport and yard organization.

2. Recycling Plant Material Preparation
Recycling plants need more uniform scrap size for sorting, resale, or further processing. The shear improves consistency in output and reduces handling complexity.

3. Metal Recovery Center Operations
Metal recovery centers process a wide range of ferrous scrap forms. The machine helps reduce irregular sizes and makes downstream management more efficient.

4. Profile Steel Cutting
Long profile steel such as angle steel, channel steel, and I steel is difficult to store and stack. The machine shortens these materials to a more practical length.

5. Plate Scrap Handling
Steel plates and heavy offcuts occupy large floor areas. The shear improves storage efficiency by reducing material size.

1.4 Core Features Explanation

1. Stable Hydraulic Drive System
The machine uses a hydraulic drive system with 22.0 MPa working pressure and up to 25.5 MPa maximum pressure, supporting stable shearing performance.

2. PLC Automatic And Remote Operation
Automatic control with remote operation helps reduce operator burden and improves workflow consistency.

3. Practical Capacity For Scrap Yard Work
With 8–10 t/h output, the machine is suitable for daily scrap yard and recycling plant operations.

4. Large Feeding Opening For Mixed Scrap
The 3700 × 2500 mm feeding area allows direct loading of irregular and bulky scrap materials.

5. Air Cooling For Continuous Work
The air cooling system helps maintain hydraulic temperature stability during repeated operation cycles.

1.5 Data-Based Performance

1. Cutting Capability
2890 × 2 kN cutting force gives the machine enough power for mixed ferrous scrap and heavy profile processing.

2. Throughput Capacity
8–10 t/h output supports stable medium-scale and heavy recycling operations.

3. Cutting Speed
3–4 times per minute provides a balanced cutting rhythm for continuous production.

4. Motor Arrangement
Three 45 kW motors give about 139 kW total power to support the hydraulic system.

5. Material Adaptability
The machine can process square steel, angle steel, round steel, steel plate, channel steel, and I steel within the defined range.

1.6 Problem Solving Value

1. Mixed Scrap Handling Difficulty
Irregular steel scrap is hard to classify and store when untreated.

2. Yard Space Waste
Oversized scrap takes up excessive space in processing and storage areas.

3. Loading Inefficiency
Long materials reduce truck loading efficiency and increase transport difficulty.

4. Sorting And Transfer Burden
Uncut scrap creates extra handling steps during sorting and relocation.

5. Low Productivity In Manual Workflows
Manual or secondary cutting methods slow down plant operations.

The Q43W-6300A helps solve these problems by converting oversized steel scrap into shorter and more manageable pieces, improving storage density and overall operating efficiency.

2. RFQ (Request For Quotation)

1. What kinds of steel scrap are most common in your yard or recycling plant?
Please tell us whether you mainly handle plate scrap, profile steel, structural steel, or mixed ferrous materials.

2. What hourly capacity do you expect from the machine?
Your target capacity will help us confirm whether this model matches your production plan.

3. What is the maximum size of the scrap before cutting?
Please share the length, width, and thickness of the material so we can evaluate suitability.

4. Do you need the machine to fit into an existing scrap processing line?
If yes, we can consider material flow, loading direction, and control requirements in the proposal.

5. What electrical standard and installation conditions do you have?
Please confirm your voltage, frequency, and available installation space for a more accurate recommendation.

3. FAQ

1. Is this hydraulic steel scrap shear suitable for scrap yards?
Yes. It is suitable for scrap yards that need to process oversized steel scrap into manageable sections.

2. What is the capacity of this model?
The machine capacity is about 8–10 tons per hour.

3. Can this machine process mixed ferrous scrap?
Yes. It is suitable for mixed ferrous scrap, profile steel, and plate scrap within the cutting range.

4. What control method does the machine use?
It uses PLC automatic control together with remote operation.

5. What is the total installed power?
The total power is about 139 kW.

4. CTA

Looking for a hydraulic steel scrap shear for your scrap yard or recycling plant?

Contact Jiangsu Wanshida Hydraulic Machinery Co., Ltd. to get:

1. A suitable machine recommendation based on your scrap type
2. A technical solution matched to your target output
3. Main configuration details and quotation support
4. Guidance for installation, commissioning, and operation

Send us your inquiry now and get a practical solution for scrap processing.